Malibu L4-2.4L (2010)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement
Removal Procedure
1. Remove the knee bolster. Refer to Driver Knee Bolster Panel Replacement (See: Restraint Systems/Knee Diverter/Service and Repair).
2. Remove the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Insulator Replacement - Left Side).
3. Disconnect the electrical connector from the brake apply sensor.
4. Remove the steering column assembly from the vehicle. Refer to Steering Column Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Replacement).
5. Disconnect the brake pedal pushrod retaining clip (1) the wave washers (2) and the brake booster pushrod (3) from the brake pedal pin (4).
6. Remove the 2 brake pedal assembly to cowl mounting nuts.
