Malibu L4-2.4L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Install the 2 brake caliper guide pin bolts and tighten to 35 Nm (26 lb ft).
9. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
10. Lower the vehicle.
11. Fill the master cylinder to the proper level. Refer to Master Cylinder Reservoir Filling (See: Hydraulic System/Brake Master Cylinder/Service
and Repair/Procedures/Master Cylinder Reservoir Filling).
12. Pump the brake pedal 2-3 times in order to seat the rear disc brake pads to the rotor.
Front Brake Caliper Bracket Replacement
Front Brake Caliper Bracket Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
