Malibu L4-2.4L (2010)
2. Push upward on the radiator and downward on the condenser to snap the condenser mounting tabs into the radiator clips.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install new condenser mounting nut to the radiator and tighten to 6 Nm (53 lb in).
4. Install new condenser mounting bolts and tighten to 6 Nm (53 lb in).
5. Install the cooling fan and shroud assembly. Refer to Cooling Fan and Shroud Replacement (See: Radiator Cooling Fan/Service and Repair).
Radiator Support Replacement
Radiator Support Replacement
