Malibu L4-2.4L (2010)
6. Install the camshaft bearing caps. Hand tighten the cap bolts.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Tighten the bearing cap bolts in increments of 3 turns until they are seated. Tighten the bolts to 10 Nm (89 lb in).
8. Install the intake camshaft position actuator. Refer to Camshaft Position Intake Actuator Replacement (See: Camshaft Position Intake Actuator
Replacement).