Malibu L4-2.4L (2010)
*
The long bolts through the engine mount bracket to the engine block
*
The short bolt through the engine lift bracket to the engine mount bracket
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the engine mount bracket bolts in the following sequence:
1. Tighten the engine mount bracket to engine block bolts to 90 Nm (66 lb ft).
2. Tighten the engine lift bracket to engine mount bracket bolts to 33 Nm (24 lb ft).
4. Install the engine mount. Refer to Engine Mount Replacement (See: Engine Mount Replacement).