Malibu L4-2.4L (2010)
Specifications)
8. Install the HO2S using J 39194-B.
Tighten the sensor to 42 Nm (31 lb ft).
9. Connect the engine wiring harness electrical connector (4) to the HO2S electrical connector (3).
10. Install the HO2S electrical connector rosebud clip to the oil level indicator tube tab.
11. Install the CPA retainer (5).
12. Install the air intake duct. Refer to Air Cleaner Inlet Duct Replacement (See: Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Inlet Duct Replacement).
