Malibu L4-2.4L (2010)
7. Remove the upper exhaust manifold bolts.
8. Remove the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side (See: Catalytic Converter/Service and
Repair/Catalytic Converter Replacement - Right Side).
9. Remove the lower exhaust manifold bolts.
10. Remove the exhaust manifold.
11. Remove and discard the exhaust manifold gasket.
Installation Procedure
1. Install a NEW exhaust manifold gasket onto the cylinder head studs.
2. Install the exhaust manifold.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the exhaust manifold bolts and tighten to 20 Nm (15 lb ft).
4. Install the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side (See: Catalytic Converter/Service and Repair/Catalytic
Converter Replacement - Right Side).