Malibu L4-2.4L (2010)
4. Pull back the muffler assembly in order to remove the exhaust pipe from the right catalytic converter.
5. Remove and discard the exhaust pipe gasket.
Installation Procedure
1. Install a NEW exhaust pipe gasket.
2. Pull back the muffler assembly in order to install the exhaust pipe to the right catalytic converter.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the exhaust pipe to right catalytic converter nuts and tighten to 25 Nm (18 lb ft).
4. Install the exhaust pipe to muffler nuts and tighten to 25 Nm (18 lb ft).
5. Lower the vehicle.
