Malibu L4-2.4L (2010)
1. Install a NEW air filter assembly.
2. Close the air cleaner cover.
3. Engage the air cleaner cover latches (1).
4. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
5. Install the air cleaner outlet duct to the air cleaner assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Tighten the air cleaner outlet duct clamp at the air cleaner assembly to 4 Nm (35 lb in).