Malibu L4-2.4L (2010)
12. Disconnect the fuel tank fuel feed pipe quick connect fitting (1) from the chassis fuel feed pipe (3). Refer to Plastic Collar Quick Connect Fitting
Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
13. Disconnect the fuel tank EVAP pipe quick connect fitting (2) from the chassis EVAP pipe (4). Refer to Plastic Collar Quick Connect Fitting
Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
14. Cap the chassis fuel and EVAP pipes in order the prevent possible fuel and/or EVAP system contamination.
15. Remove the brake, fuel and EVAP pipe retainers (5) from the underbody studs.
16. Remove the brake pipes from the retainers.
17. Remove the fuel feed/EVAP pipe assembly from the vehicle.
18. Place the pipe assembly on a work bench.
19. Open and remove the upper fuel feed/EVAP pipe retainer (3).
20. Open and remove the front of dash fuel feed/EVAP pipe retainers (4).
21. Open and remove the underbody retainers (5).
22. Replace any retainers as necessary.
Installation Procedure
