Malibu L4-2.4L (2010)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Intake
Camshaft Position Sensor Replacement - Intake
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and
Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
2. Disconnect the engine wiring harness electrical connector (7) from the intake camshaft position (CMP) sensor (6).
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.
Installation Procedure