Malibu L4-2.4L (2010)
Shift Cable: Service and Repair
4T45-E - Automatic Transmission
Floor Shift Control Cable Replacement
Removal Procedure
1. Set the park brake and chock the wheels.
2. Disconnect the transaxle shift control cable terminal from the transaxle manual shift lever pin.
3. Press the locking tabs (1) inward in order to release the transaxle shift control cable from the cable bracket.
4. Remove the center floor air outlet. Refer to Rear Floor Air Duct Replacement (See: Heating and Air Conditioning/Air Duct/Service and
Repair/Rear Floor Air Duct Replacement).
5. Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin.
6. Release the transmission range selector lever cable retainer (1) and remove the transmission range selector cable from the transmission control
