Malibu L4-2.4L (2010)
1. Install the transmission shift control (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission shift control nuts (1) and tighten to 25 Nm (18 lb ft).
3. Attach the park lock cable to the shift control base. Ensure the park lock cable retainer (2) is fully secured to the shift control base.
4. Install the park lock cable on the park lock lever by sliding the cable end (1) over the park lock lever pin.
