Malibu L4-2.4L (2010)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump Replacement
Removal Procedure
1. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement (See: Body and
Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Panel Splash Shield Replacement).
2. Disconnect the washer pump electrical connector.
3. Disconnect the washer pump hose (2) from the washer pump (5).
4. Using a small flat-bladed tool, remove the washer pump from the washer solvent container (1).
5. Drain the windshield washer solvent into a clean suitable container.
6. Using a small flat-bladed tool, remove the washer pump terminal seal (6) from the washer solvent container (1).
Installation Procedure