Malibu L4-2.4L Hybrid (2008)
accelerator pedal adjustment position sensor has a sensing arm that must be installed over the brake pedal actuation arm to insure it is sensing
brake pedal position.
1. Install the brake and accelerator pedal adjustment position sensor (2) to the brake pedal bracket. Ensure the brake pedal position sensor tab locks
into the brake pedal bracket and the sensors arm is correctly installed.
Notice: Refer to Fastener Notice.
2. Install the brake pedal adjustment position sensor bolt (1).
Tighten the bolt to 2 N.m (18 lb in).
3. Connect the electrical connector to the brake and accelerator pedal adjustment position sensor.
4. Install the intermediate steering shaft to the steering column.
5. Install the left side instrument panel insulator panel.
