Malibu L4-2.4L Hybrid (2008)
20. Remove the frame to body bolts.
21. Lower the frame from the vehicle.
22. Disconnect the heated oxygen sensor wiring harness from the retainer at the rear transmission mount.
23. When replacing the frame, remove the following components:
*
Steering gear-Refer to Power Steering Gear Replacement (Electronic Power Steering (EPS)) Power Steering Gear Replacement (Hydraulic
Power Steering (HPS)).
*
Stabilizer shaft-Refer to Stabilizer Shaft Replacement.
*
Rear transmission mount bracket-Refer to Transmission Rear Mount Replacement for the 4T40-E/4T45-E transmission.
Installation Procedure
1. When replacing the frame, install the following components:
*
Steering gear-Refer to Power Steering Gear Replacement (Electronic Power Steering (EPS)) Power Steering Gear Replacement (Hydraulic
Power Steering (HPS)).
*
Stabilizer shaft-Refer to Stabilizer Shaft Replacement.
