Malibu L4-2.4L Hybrid (2008)
1. Clean the sealing surface of the BPMV with denatured alcohol and a clean shop cloth.
2. Carefully align the EBCM to BPMV electrical terminals and install the EBCM to the BPMV.
Notice: Refer to Fastener Notice .
3. Install the 4 EBCM bolts. Tighten the bolts in a cross pattern.
Tighten the bolts to 6 N.m (53 lb in).
Important: Ensure the electrical connector is correctly inserted into the EBCM prior to placing the locking lever into position. Failure to
make a proper connection may cause communication problems with the module.
4. Connect the electrical connector to the EBCM.