chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Thermostat Housing, Engine Cooling|LAT|Page 5041 > < Thermostat Housing, Engine Cooling|LAT|Page 5039
Page 8
background image

24. Connect the engine wiring harness electrical connector (1) to the ECT sensor.
25. Install the HO2S electrical connector rosebud clip to the thermostat housing.
26. Install the battery tray. Refer to Battery Tray Replacement (LZ4/LY7)  Battery Tray Replacement (LAT)   .

27. Verify the drain valves at the radiator and water pump are closed.
28. Lower the vehicle.
29. Fill the cooling system. Refer to Cooling System Draining and Filling (LY7, LZ4, Static Fill) Cooling System Draining and Filling (LAT Static

Fill)  (See: Service and Repair)Cooling System Draining and Filling (LE5 Static Fill)  (See: Service and Repair) .

Thermostat Housing, Engine Cooling|LAT|Page 5041 > < Thermostat Housing, Engine Cooling|LAT|Page 5039