Malibu L4-2.4L Hybrid (2008)
Housing Assembly HVAC: Service and Repair
HVAC Module Assembly Replacement
Removal Procedure
1. Remove the air conditioner (A/C) lines from the thermal expansion valve.
2. Remove the heater hose from the heater core.
3. Remove the instrument panel (I/P) assembly.
4. Remove the recirculation actuator wire harness connector.
5. Remove the air temperature actuator wire harness connector.
6. Remove the mode actuator wire harness connector.
7. Remove the blower motor wire harness connector.
8. Remove the blower motor resistor wire harness connector.
9. Remove the left hand side window defogger outlet duct.
10. Remove the HVAC module assembly mounting bolts from the instrument panel reinforcement.
