Malibu L4-2.4L Hybrid (2008)
18. Connect the body wiring harness electrical connector (1) to the generator battery disconnect control module pigtail.
19. Install the 36-volt positive battery cable leads (2).
20. Install the 36-volt positive battery cable lead nut (1).
Tighten the nut to 9 N.m (18 lb in).
21. Install a NEW 36-volt positive battery cable lead nut (3). Start the nut finger tight, and then torque to the specification given.
Tighten the nut to 15 N.m (11 lb ft).