Malibu L4-2.4L Hybrid (2008)
1. Install the generator battery temperature sensor wiring harness (1) to the generator battery assembly.
2. Clip the wiring harness retainers.
3. Install the 2 small temperature sensor wiring harness terminal leads to the batteries.
4. Install the generator battery cable leads (2 and 3) to the batteries.
Notice: Refer to Fastener Notice.
5. Install the generator battery cable lead nuts and terminal covers.
Tighten the nut to 8 N.m (71 lb in).
6. Connect the generator battery temperature sensor wiring harness electrical connectors (1) to the battery temperature sensors.
7. Install NEW tie straps in order to secure the battery cables to the generator battery temperature sensor wiring harness.
