Malibu L4-2.4L Hybrid (2008)
4. Using the adjustable jack, raise the right side of the fuel tank.
5. Install the right side rear fuel tank strap (1) bolt.
6. Tighten the left side fuel tank strap (2) bolts.
Notice: Refer to Fastener Notice.
7. Tighten the right side front fuel tank strap bolt.
Tighten the bolts to 20 N.m (15 lb ft).
8. Remove the support from the fuel tank.
9. Install the fuel fill pipe hose to the fuel tank.
10. Connect the fuel tank fill EVAP emission pipe quick connect fitting (2) to the fuel tank fill EVAP emission pipe (1).
11. Tighten the fuel fill pipe hose clamp (3) at the fuel tank.
Tighten the clamp to 4 N.m (35 lb in).
