Malibu L4-2.4L Hybrid (2008)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine
Evaporative Emission Hoses/Pipes Replacement - Engine
Removal Procedure
1. Remove the intake manifold cover.
2. Remove the air cleaner outlet duct.
3. Disconnect the engine evaporative emission (EVAP) line quick connect fitting from the canister purge solenoid valve.
4. Disconnect the engine EVAP line quick connect fitting from the intake manifold.
5. Remove the engine EVAP line (1).
Installation Procedure
1. Install the engine EVAP line (1).