chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Metal Collar Quick Connect Fitting Service|Page 9473 > < Metal Collar Quick Connect Fitting Service|Page 9471
Page 1
background image

Fuel Line Coupler: Service and Repair
Plastic Collar Quick Connect Fitting Service

Plastic Collar Quick Connect Fitting Service

Removal Procedure

Caution:  Refer to Gasoline/Gasoline Vapors Caution.

Important:  There are several types of plastic collar fuel and evaporative emission quick connect fittings that may be used on this vehicle.

*

Bartholomew (1)

*

Q release (2)

*

Squeeze to release (3)

*

Sliding retainer (4)

*

Push down TI (5)

The following instructions apply to all of these types of fittings except where indicated.

Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027-100) Fuel Pressure Relief (Without CH 48027-100).

Caution:  Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.

1. Using compressed air, blow any dirt out of the quick connect fitting.

Metal Collar Quick Connect Fitting Service|Page 9473 > < Metal Collar Quick Connect Fitting Service|Page 9471