Malibu L4-2.4L Hybrid (2008)
Pedal Positioning Sensor: Service and Repair
Brake and Accelerator Pedal Adjustment Position Sensor Replacement
Removal Procedure
1. Remove the left side instrument panel insulator panel.
2. Remove the intermediate steering shaft bolt and position the intermediate steering shaft away from the steering column in order to gain access to
the brake pedal adjustment position sensor.
3. Disconnect the electrical connector from the brake and accelerator pedal adjustment position sensor.
4. Remove the brake and accelerator pedal adjustment position sensor bolt (1) and sensor (2).
Installation Procedure
Important: Ensure that the brake and accelerator pedal adjustment position sensor is installed correctly to the bracket. The brake and
