Malibu L4-2.4L Hybrid (2008)
10. Disconnect the generator battery temperature sensor wiring harness electrical connectors (1) from the battery temperature sensors.
11. Remove the generator battery terminal covers and nuts securing the generator battery cable leads (2 and 3).
12. Remove the generator battery cable leads (2 and 3) from the batteries.
13. Remove the 2 small temperature sensor wiring harness terminal leads located under the battery cable leads (2 and 3) from the batteries.
14. Cut the tie straps securing the battery cables to the generator battery temperature sensor wiring harness.
15. Unclip the wiring harness retainers.
16. Remove the generator battery temperature sensor wiring harness (1) from the generator battery assembly.
Installation Procedure
