Malibu L4-2.4L Hybrid (2008)
1. Install the generator battery disconnect control module (1).
Notice: Refer to Fastener Notice.
2. Install the 4 generator battery disconnect control module bolts.
Tighten the bolts to 8 N.m (71 lb in).
3. Clip the fan harness retainer to the battery.
4. Install the generator battery disconnect control module pigtail (2) clip to the side of the battery carrier.
5. Position the generator battery temperature sensor wiring harness and the battery cables to the generator control module.
6. Connect the generator battery temperature sensor wiring harness electrical connectors (2, 5) to the generator control module.
7. Connect the wiring harness electrical connector (1) to the vent fan electrical connector.
