Malibu L4-2.4L Hybrid (2008)
7. Connect the body wiring harness electrical connector (1) to the ECM.
8. Position the body wiring harness UBEC electrical connectors (5) to the UBEC bracket and snap into place.
9. Position the forward lamp wiring harness UBEC electrical connector (4) to the UBEC bracket and snap into place.
10. Position the engine wiring harness UBEC electrical connector (3) to the UBEC bracket and snap into place.
11. Install junction block (12).
12. Tighten the junction block bolts (6) until the bolts engage the electrical connectors, an audible click will be heard.
Tighten the bolts to 4 N.m (35 lb in).
