Malibu L4-2.4L Hybrid (2008)
Notice: Refer to Fastener Notice .
4. Secure the 12 control valve body bolts (2) M6 x 30.
Tighten the bolts in sequence to 12 N.m (106 lb in).
5. Secure the 3 control valve body bolts (1) M5 x 40.5.
Tighten the bolts in sequence to 8 N.m (71 lb in).
6. Connect the input speed sensor electrical connector (1).
7. Connect the output speed sensor electrical connector (2).
8. Connect the shift position switch electrical connector (3).
9. Install the transmission control valve body cover. Refer to Control Valve Body Cover Replacement (See: Valve Body/Service and
Repair/6T40/6T45 - Automatic Transmission/Control Valve Body Cover Replacement) .
