chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Seals and Gaskets, A/T > < 4T45-E - Automatic Transaxle|Page 11916
Page 4
background image

11. Connect the shift position switch electrical connector (3).
12. Install the control valve body cover. Refer to Control Valve Body Cover Replacement  (See: Valve Body/Service and Repair/6T70/6T75 -

Automatic Transmission/Control Valve Body Cover Replacement) .

13. For transmission control module programming and setup. Refer to Control Module References   .

Important:  After an internal transmission repair or internal part replacement the service fast learn adapt procedure should be
performed.

14. Perform the service fast learn adapt procedure. Refer to Service Fast Learn Adapts  (See: Testing and Inspection/Component Tests and General

Diagnostics/6T70/6T75 - Automatic Transmission/Service Fast Learn Adapts) .

Seals and Gaskets, A/T > < 4T45-E - Automatic Transaxle|Page 11916