Malibu L4-2.4L Hybrid (2008)
1. Install the 3 input speed sensor seals (1).
2. Install the input speed sensor (3).
Notice: Refer to Fastener Notice .
Important: Apply threadlocker GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the input speed sensor bolt.
3. Install the input speed sensor bolt (2) M6 x 23.
Tighten the bolt to 12 N.m (106 lb in).
4. Connect the input speed sensor electrical connector (1).
5. Install the transmission control valve body cover. Refer to Control Valve Body Cover Replacement (See: Valve Body/Service and
Repair/6T40/6T45 - Automatic Transmission/Control Valve Body Cover Replacement) .
Perform the service fast learn adapt procedure. Refer to Service Fast Learn Adapts (See: Testing and Inspection/Component Tests and General
Diagnostics/6T40/6T45 - Automatic Transmission/Service Fast Learn Adapts) .
