Malibu L4-2.4L Hybrid (2008)
Shift Solenoid: Service and Repair
6T70/6T75 - Automatic Transmission
Control Solenoid Valve and Transmission Control Module Assembly Replacement
Removal Procedure
1. Remove the control valve body cover. Refer to Control Valve Body Cover Replacement (See: Valve Body/Service and Repair/6T70/6T75 -
Automatic Transmission/Control Valve Body Cover Replacement) .
2. Disconnect the input speed sensor electrical connector (1).
3. Disconnect the output speed sensor electrical connector (2).
4. Disconnect the shift position switch electrical connector (3).
5. Remove the 4 control valve body bolts (1) M6 x 80.
6. Position the control solenoid valve spring (8) to the side. Spring will be released with the removal of the control valve body assembly.
