Malibu L4-2.4L Hybrid (2008)
3. Attach the park lock cable to the shift control base. Ensure the park lock cable retainer (2) is fully secured to the shift control base.
4. Install the park lock cable on the park lock lever by sliding the cable end (1) over the park lock lever pin.
5. Install the transmission range selector lever cable retainer (1) to the shift lever base. (4).
6. Install the transmission range selector lever cable terminal (2) to the shift lever pin (3).
7. Adjust the automatic transmission range selector lever cable. Refer to Range Selector Lever Cable Adjustment (See: Shift Linkage/Shift
Cable/Adjustments) .
8. Adjust the park lock cable. Refer to Park Lock Cable Adjustment (See: Parking Lock Cable/Adjustments/6T40/6T45 - Automatic Transmission) .
9. Install the console. Refer to Front Floor Console Replacement .
Automatic Transmission Range Selector Lever Replacement
Automatic Transmission Range Selector Lever Replacement
Removal Procedure