Malibu L4-2.4L Hybrid (2008)
2. Install the transmission mount to frame bolts. Hand tighten only.
3. Use the jackstand to lower the transmission mount bracket on to the transmission mount studs.
4. Install the transmission mount to bracket upper nut. Hand tighten only.
Notice: Refer to Fastener Notice .
5. Tighten the transmission mount nut and bolts.
*
Tighten the transmission mount upper nuts to 50 N.m (37 lb ft).
*
Tighten the transmission mount lower bolts to 50 N.m (37 lb ft).
6. Install the left splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement .
7. Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
8. Lower the vehicle.
