chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Hood Latch Release Cable: > < Hood - Will Not latch|Page 10683
Page 3
background image

3.

Remove the two upper push-in retainers (2) from the left splash deflector.

4.

Position the deflector out of the way by pulling the top downward.

5.

Reposition the hood release cable (1) from below the splash deflector to above the splash deflector.

6.

Reinstall the two splash deflector push-in retainers (1).

7.

Lower the vehicle.

8.

Close and reopen the hood to insure proper operation.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

All Other Service Bulletins for Hood Latch Release Cable: > < Hood - Will Not latch|Page 10683