Malibu V6-191 3.1L VIN M SFI (1997)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
REMOVE OR DISCONNECT
1. Electrical connector to fluid level switch.
2. Brake pipe tube nuts from master cylinder assembly. Plug open brake pipes to prevent brake fluid loss and contamination.
3. Master cylinder mounting nuts.
4. Master cylinder from booster.
INSTALL OR CONNECT
1. Master cylinder to power booster assembly. Tighten Master cylinder assembly mounting nuts to 27 Nm (20 ft. lbs.).
2. Brake pipes tube nuts to master cylinder assembly. Tighten Brake pipe tube nuts to 23 Nm (17 ft. lbs.).
3. Electrical connector to fluid level switch.
4. Fill master cylinder to proper level with clean brake fluid.
5. Bleed hydraulic system. See: Service and Repair
