Malibu V6-191 3.1L VIN M SFI (1997)
Exterior Components
10. Booster pushrod from brake pedal. Tilt entire vacuum booster slightly to work booster pushrod off pedal clevis pin without putting undue side
pressure on the pushrod.
11. Booster from vehicle.
INSTALL OR CONNECT
1. Booster to vehicle.
2. Booster pushrod to brake pedal. Tilt entire vacuum booster slightly to work booster pushrod onto pedal clevis pin without putting undue side
pressure on the pushrod. Use left hand to align pushrod with pedal and push together.
3. Left sound insulator.
4. Booster attaching nuts. Tighten Booster to brake pedal attaching nuts to 27 Nm (20 ft. lbs.).
5. Vacuum hose to vacuum check valve.
6. Master cylinder to booster.
7. Master cylinder attaching nuts. Tighten Master cylinder to booster attaching nuts to 27 Nm (20 ft. lbs.).
8. Brake pipes to master cylinder. Tighten Brake pipes to master cylinder to 23 Nm (17 ft. lbs.).
9. Bussed Electrical Center bracket.
10. Move Bussed Electrical Center forward.
11. Air bag.
