Malibu V6-191 3.1L VIN M SFI (1997)
Remove or Disconnect
1. Negative battery cable.
2. Drain cooling system.
3. Heater hoses from heater core and moisture drain tube.
4. Instrument Panel and console.
5. Heater outlet.
6. Heater core cover.
^
There is a mounting screw located in a recess in the center of the cover
7. Heater core mounting clamps and heater core.
Install or Connect
1. Heater core and heater core mounting clamps.
Tighten
^
Screws to 1 Nm (9 lb in).
2. Heater core cover.
Tighten
^
Screws to 1 Nm (9 lb in).
3. Heater core outlet.
Tighten
^
Screws to 1 Nm (9 lb in).
4. Instrument Panel and Console.
5. Heater hoses to heater core and moisture drain tube.
6. Fill cooling system.
7. Negative battery cable.
Tighten
^
Bolt to 16 Nm (12 lb ft).
