chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 11307 > < Air Bag Disarming and Arming|Page 11305
Page 3
background image

Description

INSTALL OR CONNECT

^

Remove the key from the ignition switch.

1. Passenger yellow 2-way connector and the CPA located behind the Instrument panel compartment.
2. Instrument panel compartment. Refer to instrument panel compartment in Instrument Panel, Gauges and Console.
3. Driver yellow 2-way connector and the CPA located at the base of the steering column.
4. Instrument Cluster insulator (left side). Refer to instrument panel in Instrument Panel, Gauges and Console.
5. The AIR BAG Fuse to the LH I/P Bussed Electrical Center (LH I/P BEC). Refer to Power Distribution in Diagrams.

^

Staying well away from both air bags, turn the ignition switch to the RUN position. Verify that the AIR BAG warning lamp flashes seven times
and then stays off. If the AIR BAG warning lamp does not operate as described, perform the SIR DIAGNOSTIC SYSTEM CHECK.  See:
Restraint Systems/Air Bag Systems/Testing and Inspection

Air Bag Disarming and Arming|Page 11307 > < Air Bag Disarming and Arming|Page 11305