Malibu V6-191 3.1L VIN M SFI (1997)
Throttle Cable/Linkage: Service and Repair
Accelerator Control Cable Replacement
Removal Procedure
1. Remove the left instrument panel sound insulator. Refer to Instrument Panel, Gauges and Warning Indicators.
2. Remove the accelerator cable from the accelerator pedal.
3. Squeeze the accelerator cable cover tangs and push the accelerator cable through the bulkhead.
4. Remove the accelerator cable shield, if equipped.
5. Remove the accelerator cable from the retaining clips.
6. Remove the accelerator cable from the throttle body lever.
7. Remove the accelerator cable from the accelerator cable bracket.
8. Remove the accelerator cable from the vehicle noting cable routing.
Installation Procedure
Notice: In order to prevent possible interference and damage. flexible components (hoses, wires, conduits, etc.) must not be routed within 50 mm (2 in)
