Malibu V6-191 3.1L VIN M SFI (1997)
11.
Ignition switch assembly from vehicle.
12.
Insert key into ignition switch cylinder and rotate to the RUN position.
13.
Press the cylinder release plunger (located at the 4 o'clock position) on the ignition switch assembly.
14.
Pull cylinder from ignition switch with key.
Install or Connect
1.
Cylinder to ignition switch, verify engagement and operation with key.
2.
Ignition switch assembly to vehicle.
3.
Ignition lock cable to ignition switch assembly, verify engagement.
4.
Ignition switch assembly electrical connectors, verify engagement.
5.
Ignition switch assembly bolts.
6.
Instrument cluster.
7.
Instrument cluster trim plate.
8.
Upper steering column cover.
9.
Accessory trim plate.
10.
Ignition switch trim ring.
11.
Enable SIR system. Refer to Enabling SIR in Section 8C of the Service Manual.
12.
Negative battery cable.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation
Description
Labor Time
Cylinder, Ignition
Use published
E7200
Lock - R & R or
labor operation
Replace
time