chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Seat Sensor/Switch > < Front Seat Shoulder Belt - Slow to Retract|Page 10040
Page 3
background image

4.

Using a tape measure (4), measure the length of the shoulder belt material from the "D" ring (3) on the height adjuster (1) to the masking tape (2).
Refer to Figure 2.

5.

After measuring, remove the masking tape from the shoulder belt material.

If the shoulder belt material length while fully extended is LESS THAN 1480 mm (58 inches), the vehicle has the shorter shoulder belt installed. Install
the new shoulder belt retractors with the longer material length. If the shoulder belt material length while fully extended is MORE THAN 1480 mm (58
inches), the vehicle already has the new longer shoulder belt installed. See Group 16.714 of the appropriate GMSPO Parts Catalog for seat belt extender
availability.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Seat Sensor/Switch > < Front Seat Shoulder Belt - Slow to Retract|Page 10040