Malibu V6-191 3.1L VIN M SFI (1997)
Power Steering Pump: Service and Repair
On-Vehicle Service
REMOVE OR DISCONNECT
1. Belt.
2. Nut from bracket retaining hose on alternator.
3. Engine mount.
4. Pump bolts (3) to ease pump line removal.
5. Lines at pump.
6. Transfer pulley (if necessary).
INSTALL OR CONNECT
1. Lines at pump.
^
Tighten power steering gear inlet pipe to pump to 27 Nm (20 ft. lbs.).
2. Pump (3) bolts.
^
Tighten pump mounting bolts to 34 Nm (25 ft. lbs.).
3. Belt.
4. Engine mount.
5. Nut to bracket retaining hose on alternator.
6. Fill with fluid and bleed air from power steering system.
^
Inspect for leaks.
