Malibu V6-191 3.1L VIN M SFI (1997)
3. New shaft retaining ring (30) onto drive shaft (7).
4. Drive shaft sub-assembly into pump housing (10).
5. Pump ring (26) with holes positioned correctly onto dowel pins (6), in pump housing (10).
6. Vanes (27) into pump rotor.
7. Lubricate new O-ring (32) with power steering fluid.
^
O-ring (32) into groove in pump housing (10).
8. Pressure plate (31).
9. Pressure plate spring (33).
10. Lubricate new O-ring with power steering fluid.
^
O-ring (35) into end cover (36).
11. Lubricate outer edge of end cover (36) with power steering fluid.
^
Press end cover (36) into pump housing (10).
12. Retaining ring (37) into groove in pump housing (10), with ring opening near access hole in pump housing (10).
Important: Retaining ring opening must be located next to mounting boss.
