Malibu V6-191 3.1L VIN M SFI (1997)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley Replacement
^
Tools Required:
-
J 25034-B Power Steering Pulley Remover
-
J 25033-B Installer; or
-
J 36015 Power Steering Pulley Installer
-
Or Equivalents
REMOVE OR DISCONNECT
1. Belt from pulley.
2. Pump from engine for tool clearance.
^
It is not necessary to remove the pressure and return lines from the pump.
3. Pulley using J 25034-B.
INSTALL OR CONNECT
1. Pulley using J 25033-B or J 36015.
Important:
^
Face of pulley hub must be flush with pump drive shaft.
^
Do not use arbor press to install pulley.
2. Pump to engine.
3. Belt on pulley.
4. Bleed power removed from engine.