Malibu V6-191 3.1L VIN M SFI (1997)
Rear Knuckle Alignment Link: Service and Repair
Rear Lateral Links and Trailing Arms Replacement (Front)
^
Tool Required:
-
J 36660 Torque Angle Meter
-
Or Equivalent
REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Tire and wheel.
3. ABS wire harness from lateral link.
4. Link-to-knuckle nut, bolt, and washer.
5. Link nut at rear suspension support.
6. Push bolt forward enough to provide link removal clearance.
7. Rear link (front).
INSTALL OR CONNECT