chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - Delay Engagement into Drive After Cold Soak|Page 7026 > < A/T - 4T40-E/4T45-T Engineering Changes
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - Delay Engagement into Drive After Cold Soak

File In Section: 7 - Transmission

Bulletin No.: 67-71-60

Date: February, 1997

Subject: 
Delay Engagement into Drive After Cold Soak
(Replace with Revised Forward Clutch Housing Assembly Complete)

Models: 
1995-97 Chevrolet Cavalier
1997 Chevrolet Malibu
1997 Oldsmobile Cutlass
1995-97 Pontiac Sunfire
with HYDRA-MATIC 4T40-E Transaxle (RPO MN4) and with 2.2L, 2.3L, 2.4L, 3.1L Engine (VINs 4, D, T, M - RPOs LN2, LD2, LD9, L82)

Condition

Some owners of the above models may experience an initial delay when shifting into drive after the vehicle has gone through an overnight cold soak
usually at -12° C (10° F) ambient temperature or colder. This condition will not repeat until the vehicle has gone through another overnight cold soak.
During the initial delay, an increase to engine RPM could cause the engagement into forward gear to be harsh. (See Figure 1)

Cause

A/T - Delay Engagement into Drive After Cold Soak|Page 7026 > < A/T - 4T40-E/4T45-T Engineering Changes