Malibu V6-191 3.1L VIN M SFI (1997)
Shift Solenoid: Service and Repair
REMOVE OR DISCONNECT
1. Remove negative battery cable.
2. Remove transaxle case side cover.
3. Remove retainer clip from the specified solenoid using a small screwdriver.
4. A shift solenoid has one O-ring. The pressure control solenoid and TCC solenoid have 2 O-rings. Remove the solenoid and O-ring or O-rings from
transaxle.
IMPORTANT: Inspect the O-rings and solenoids for any damage.
INSTALL OR CONNECT
1. Install the solenoid and O-ring or O-rings.
2. Install the retainer clip holding the solenoid in the valve body.
3. Install the transaxle case side cover.
4. Connect the negative battery cable.
