Malibu V6-3.1L VIN J (2002)
Body Control Module: Removal and Replacement
REMOVAL PROCEDURE
1. Make sure the ignition switch is in the off position.
2. Remove the right sound insulator.
3. Remove the Body Control Module (BCM) (2).
4. Disconnect the BCM connectors from the BCM.
INSTALLATION PROCEDURE
1. Connect the BCM connectors to the BCM.
2. Install the BCM module (2).
3. Install the right sound insulator.
4. Program the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration. See: Testing and Inspection/Programming and
Relearning
