Malibu V6-3.1L VIN J (2002)
Front Door Panel: Service and Repair
Bezel Replacement
Door Handle Bezel Replacement
Removal Procedure
1. Remove the door handle bezel screw (1) from the door handle bezel (2).
2. Remove the door handle bezel from the trim panel by lifting out at the front.
3. Remove the power door lock switch (2) from the door handle bezel (3) by releasing the retaining tabs if equipped.
4. Disconnect the electrical connector (1) from the power door lock switch (2).
Installation Procedure
1. Connect the electrical connector (1) to the power door lock switch (2).
2. Install the power door lock switch (2) to the door handle bezel (3) by pressing it into the retaining tabs until fully seated.
3. Install the door handle bezel (2) to the trim panel by engaging the tabs.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the door handle bezel screw (1) to the door handle bezel (2).